Search:

I'll give them a call today and see what they say. I would try the old one, but we threw it away when we changed to the new one. I knew that was a bad idea! Ha ha. Basically, we replaced a large...

Is there something else I should check off the top of your heads?

Well then I'm at a loss for what could be causing this. Looks like its time to call a plumber and see if they can figure it out.

I decided to test on an actual faucet in both of our bathrooms and static was 85 and dynamic was about 78. Still too high though for the posi temp?

Ok, tested the water pressure at an outside hydrant that I know is on the house side of the regulator and meter and it was 85 static, and about 83 dynamic. That's pretty high right?

I should also note this. This morning I was taking my shower and before I was done, I turned the handle to almost full cold. The water stayed full hot. It was tolerable, because I turned my water...

I'm going to Lowes over lunch to buy a pressure tester. Since the hydrants on my house are after the meter, they should work for the test, correct? What should the levels be for static and dynamic? ...

Hmm...ok...but what would make this change so suddenly? I can't say for sure, but it seemed to start around the time we put a new wand style shower head on that shower. Neither my wife or I can say...

Hey guys, I need some help here. I have a shower with a Moen Posi Temp valve. Its installed in a bathtub/shower combo. Lets say for this example I have the handle directly pointed up...right in...