(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: Cruisinfanatic; Keyword(s):

Search: Search took 0.10 seconds.

  1. Replies
    1
    Views
    1,632

    Weil-McLain GV4 quits

    Going on 24 years old and has intermittently always given me grief. Seems like a couple times a year it just quits.
    Often if I shut off the breaker for 5 or 10 minutes and back on, it will work...
  2. Replies
    29
    Views
    7,723

    I ended up taking the unit out, turning on side...

    I ended up taking the unit out, turning on side and hosed all the salt out. Much of it was caked dust at the bottom. Unfortunately as you know nothing turns out to be easy. All the o rings on the...
  3. Replies
    29
    Views
    7,723

    I may have the problem. The reason the suction...

    I may have the problem. The reason the suction works fine when in the pail of water is because there isn't crap in it. The reason it stops suctioning when in the well is because it's got lots of salt...
  4. Replies
    29
    Views
    7,723

    What is usually the problem (material) when there...

    What is usually the problem (material) when there is a blockage?
    Thanks, a million to you and others for being patient with me.
  5. Replies
    29
    Views
    7,723

    Not sure what my next step should be. Would it be...

    Not sure what my next step should be. Would it be worth all the time it would take to empty out all the salt and water and start fresh?
  6. Replies
    29
    Views
    7,723

    Float wasn't on in my experiment. Just the end of...

    Float wasn't on in my experiment. Just the end of the tube put in the brine well. Suction for a few seconds then nothing.
  7. Replies
    29
    Views
    7,723

    Took the drain apart and found nothing blocking...

    Took the drain apart and found nothing blocking it. blew theough very easily.
    After messing around some more I've found that on brine with the hose in a bucket of water, the level goes right down....
  8. Replies
    29
    Views
    7,723

    Ok, this is what I've done. I disconnected the...

    Ok, this is what I've done.
    I disconnected the float valve, so I could feel the suction at the end of the tube. Put on brine cycle and found the suction fine. Put the tube into a bucket and a...
  9. Replies
    29
    Views
    7,723

    Kenmore no brine draw

    Replaced every stinkin seal and o ring on the thing and still can't get soft water. Reason being I guess is because the brine will not draw out. The level says constant, about 9 inches from the top....
  10. Replies
    4
    Views
    5,085

    Kenmore service tells you to take it out.

    Kenmore service tells you to take it out.
Results 1 to 10 of 10