(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: lockewell; Keyword(s):

Search: Search took 0.11 seconds.

  1. Usually when the pump manufacturer private labels...

    Usually when the pump manufacturer private labels for another company, it is real difficult to cross back to the orginal manufacturer.
  2. Replies
    3
    Views
    1,277

    If you are not getting any discharge from that...

    If you are not getting any discharge from that particular pump, there may be something wrong with the pumpr or there could be a clogged line etc.. If the two lines are connected together, you may...
  3. You may be able to take care of the issue through...

    You may be able to take care of the issue through a chemical injection system by using something like a perastaltic pump, ex. Stenner. This would be alot less expensive up front and alot easier to...
  4. Replies
    14
    Views
    1,292

    No Doubt. Unfortunately, there are companies like...

    No Doubt. Unfortunately, there are companies like that in our area also.
  5. Replies
    1
    Views
    609

    I would say you have either bad pump wire or a...

    I would say you have either bad pump wire or a bad pump motor.
  6. Replies
    5
    Views
    1,039

    Also, depending on the well itself, lowering the...

    Also, depending on the well itself, lowering the pump may not rectify the issue. If the well cannot produce enough water to recover, then the pump will still break suction even after lowering it.
  7. Replies
    5
    Views
    1,039

    At ten years old, I would recommend replacing the...

    At ten years old, I would recommend replacing the pump while the work is being done. This will also allow the pump Tech to inspect the drop pipe at the same time. Even though you may have good water,...
  8. I would not recommend trying to repair the liquid...

    I would not recommend trying to repair the liquid end at all. By the time you purchase all of the impellers and diffuser you will have at least 50% to 75% cost of a new liquid end. Also,if the pump...
Results 1 to 8 of 8