(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: brianslink; Keyword(s):

Search: Search took 0.13 seconds.

  1. Thank you.

    Thank you for the info. I am very grateful for your comments.
  2. Shower trap vent

    Does that shower trap arm on the right need a vent installed?
  3. Another pic

    Another picture for ya...this is part of my 3/4 bath. That is a vanity drain on left and a shower drain on the right (toilet drain not shown in this pic). Above the floor the vanity drain has a dry...
  4. [QUOTE=wjcandee;359418][QUOTE=brianslink;359416]Th...

    The word here is that the previous long term inspector took a job with another city and left my city scrambling for someone to replace him. They replaced him with someone that does not have any...
  5. The inspector came out today and he is fairly new...

    The inspector came out today and he is fairly new at inspections and unsure of the code for venting. He is going to review his code book and get back to me.

    I think I may provide a few add'l...
  6. There is a double beam directly under the wall so...

    There is a double beam directly under the wall so they could not send the drain down without coming outside the wall. The cabinet maker won't have any problem at all, I already talked to him about...
  7. Thank you for the replies so far. The plumber who...

    Thank you for the replies so far. The plumber who performed the drain and waste vent work is licensed and has a prominent business in my town. His bid was not low. I am having a hard time swallowing...
  8. Thanks for your reply. Yes, I purchased a...

    Thanks for your reply. Yes, I purchased a building permit through my city which includes elect, plumbing, hvac, etc. I do not think the inspector goes in the crawl space though. Here are a couple of...
  9. Is this a correct install? Pic of Shower and Toilet Drain installed by local plumber.

    I hired a local plumber to install the drain and waste vent for my new construction home. This is a picture of a drain area I am concerned with. The shower drain (double shower) on the left starts...
  10. I noticed the Pex Press Tee fittings have a...

    I noticed the Pex Press Tee fittings have a sleeve with a larger bore...I think it was .95" but I don't think my PE pipe is compatible with the Viega is it?
  11. That's what I was afraid of. I wanted to use...

    That's what I was afraid of. I wanted to use 1-1/4" Aquapex to avoid restriction, but I have 180' from my meter to my distribution manifold. The cost for 200' of the PE pipe was $96.00 and the cost...
  12. Need technical advice for Tee off 1-1/4" PE pipe

    Hello, I installed 1-1/4" PE pipe (blue in color) water service line coming from the water meter into the crawlspace of my new house. The pipe has an actual OD 1.25" and an ID of 1.05". Just to...
  13. ok guys, your info has been very helpful. I am...

    ok guys, your info has been very helpful. I am placing my order for the Onyx on Monday:)
    THANKS!
  14. HJ thanks, I will have to look into the cultured...

    HJ thanks, I will have to look into the cultured marble.

    Hackney, I just though the price was too high comparing to other things I already bought...a beautiful 6' Soaker Tub from TOTO for $975.00...
  15. Is there a quality shower base out there that does not cost $1700.00?

    I have a new construction home with crawlspace. We are ready to do the master shower...it's a double shower that is custom sized at 52" X 76" rectangular. This is the shower only, tub is in a...
  16. Thanks for your responses. I do not know my high...

    Thanks for your responses. I do not know my high and low pressure...I will have to call my municipal source and find out. I believe I will run Upnor pex inside a poly pipe sleeve. If I ever have a...
  17. Anybody have a suggestion?

    Anybody have some input here? Thanks.
  18. Advice - Pex size from meter to Hot Water Tank...48 FU

    New construction home. It's approx 90' from the meter to the sleeve in my home foundation then another 65' in the crawlspace to the water heater. I calculated 48 fuxture units for this house. The...
  19. Diagram

    Jastori, Thanks for your advice. I have a diagram that is attached showing two scenarios for my design. They are identical except Design A uses "T" fitting to the manifolds and Design B has...
  20. Jadnashua, Thanks for your input. Do you know of...

    Jadnashua, Thanks for your input. Do you know of any diagrams showing exactly where to tie the return line in and where to put the check valve so that I don't recirculate the all of the hot pipes in...
  21. I really don't want the additional expense of a...

    I really don't want the additional expense of a tankless. I want to recirculate the far bathroom only. Can this be done?
  22. Home Run Plumbing Design For New Home with far away bath

    I have a new 2700 sq ft home that is framed and dried in. No plumbing or electrical has been installed yet. The master bath, laundry, kithcen and a 3/4 guest bath are all on one side of the home and...
Results 1 to 22 of 22