Search:

https://www.plumbersstock.com/images/products/large/00245190.jpg

Some like this...

This way I could connect the tee directly to the boot....

Good to know.. But there were no ants. The tub was on top of it. The tub was resting on it.

A couple of pictures. Space is really tight, just stuck the camera in there to see what it gets.

The tub is not in it's final position.. We're still trying to figure out how to make the...

Looking for some input on how to connect the overflow/waste to existing pipe connected to the p-trap..

Thanks..

Thanks for the input.

Was really curious to know if one out performs the other. Or if they flush about the same.

Thanks again....

Thanks. Good to know we could just drop it in place...

Removed the old tub and underneath it had a layer for sand. Lot's of sand and the tub was resting on it.

I'm planning on installing an AS Americast tub and was wondering if I would have to add...

Thanks for the replies...

Just wanted to get opinions on which performs better. But since the 1.6 elongated isn't made anymore, guess it doesn't matter.

Thanks again..

Been reading many posts on this forum on how good the Toto Drake performs....we've decided to go with it.

After calling differents suppliers, I've requested the 744S but many do not have it. The...

Been a long time since my last post and hope you guys can help out. The first time around was a shower, now it's a tub.

I'm in the process of remodeling the bathroom and wanted to know...

No problem...

I have to do some research.... At least I know what to look for this time..

Yes...got a timer. Are the prices on the site current? Will see if I could find a pump locally. Maybe you could recommend a local vendor? I'm in Miami.

Thanks for you input...

Speedbump: You sell Betta Flo pumps? Are you recommending.. SFLP150

Its from a well. The well is about 65' to 70' deep.

Each sprinkler head flows 3 gallons per minute.

Zone 1
Front yard
4 full pattern @3 gpm.
15 half pattern @ 1.5 gpm

Zone 2

I'm told the well is about 65' to 70' deep. The yard medium size, not sure how many square feet. It has 2 zones, front and back. Each zone has about 18 sprinkler heads. They are the cheap popups...

I had a Baldor sprinkler pump for over 15 year, finally it quit.

I've check HD but don't like the plastic pump. Lowes has an Water Ace, looks like it's all cast iron but I'm not sure if it's...

Is it the tank that determines the distance or is it a combination of tank and bowl?

Sorry for the dumb question but what's the best way to measure it? I could go by the local HD and assemble a toilet to try and get the actual size. Do you think what HD has to offer is any good? ...

Here's my problem.

After installing the tiles on the wall, the center of the flange is 11" from the finished wall. I have the pipe sticking out above the floor, maybe 1.5', the elbow is 4" on the...

Sounds good. Looks like were going to have to build out the wall. Thanks again.

Hello everyone,

Been looking for a post that covers this but have not been able to find one. I have a Moen #82450 that needs to be install on a block wall. I'm trying to find the correct way to...

So, what do you guys think?

New drawing, it's a little rough but I hope it makes .

Hope everyone had a great Christmas.

I think I got it this time.

How about this setup.

We are planning on moving the 3' main from the left side to the right side.

I hope the picture...