(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: CleanSC; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.15 seconds.

  1. AH, ok so you are in fact in favor of it. You...

    AH, ok so you are in fact in favor of it. You said you gave up and just let the water run so I got the impression you thought they weren't worth it. I hear you on the priorities, I'm in the same...
  2. 75 seconds is a long time. You seem to be a...

    75 seconds is a long time. You seem to be a great candidate for recirc using the on-demand method, especially since your cold water is lukewarm already. 75 seconds of water flow out of two shower...
  3. Interesting first post. Are you a Rheem...

    Interesting first post. Are you a Rheem representative?
  4. Jerry: Thanks for the input. I plan to only...

    Jerry:

    Thanks for the input. I plan to only run it when needed, either by switch or by timer during peak hours.

    I was looking at it not only for the long shower wait, but also to help with...
  5. Probably as you go up in the range the insulation...

    Probably as you go up in the range the insulation gets better, causing the different energy factors.



    Okay more reason to go with 6/1 unit. Good to see solid numbers, as I was debating on a...
  6. Great tip... In fact I have a rental unit for...

    Great tip... In fact I have a rental unit for several years now, methinks I should check out the water heater in it. I've never done anything to it. That's for a new thread later.

    Anyhow. No,...
  7. Ahhh this is why I never found any info on here. ...

    Ahhh this is why I never found any info on here. Ok this thread will serve to help any future searchers on the matter.




    Excellent. Where does one find the SS elements? The ones they sell...
  8. Which Electric Tank WH Rheem Model at Home Depot? Model Breakdowns Inside

    Morning fellas. I searched for this but oddly no takers...

    I purchased a house that has a Titan electric tankless unit (ugh) installed in place of the original tank water heater. The extent of...
  9. Replies
    25
    Views
    1,621

    Let's Talk About Washer Feed Now

    Now that the washer drain is sorted, let's properly feed it.

    This is what I have in the wall. Some 1/2" copper feeds with some '71 vintage "hammer arrestors" feeding a Moen shower valve.

    How...
  10. Replies
    25
    Views
    1,621

    21106 Thanks, all! :D Off to get parts and...

    21106

    Thanks, all! :D

    Off to get parts and start.
  11. Replies
    25
    Views
    1,621

    Terry, Thank you! One question for you: When...

    Terry, Thank you! One question for you:

    When I use the adjacent utility sink (not the one in my drawings, but the one in the garage at a higher level) some water drains out of the horizontal...
  12. Replies
    25
    Views
    1,621

    How's this? All plumbing 2" pvc save for the two...

    How's this? All plumbing 2" pvc save for the two tees into the vent stack. Does the tee lying on it's back on the trap arm have to be anything special?
  13. Replies
    25
    Views
    1,621

    I see. So I suppose it's good I will be...

    I see. So I suppose it's good I will be abandoning this setup. For my education, what makes this incorrect and why? What are the symptoms if any so I can keep an eye out for other plumbing in the...
  14. Replies
    25
    Views
    1,621

    I do? The original 1971 washer hookups are...

    I do? The original 1971 washer hookups are plumbed exactly like the above drawing. One washer (left), one utility sink (right), and a shared vent/drain (center). Is this original setup no longer...
  15. Replies
    25
    Views
    1,621

    1) No floor drain. The shower drain would be...

    1) No floor drain. The shower drain would be capped and buried. Is this product okay for that?
    http://seg05.vendaria.com/zm/100/3723/03/100372303/TileGroup0/0-0-0.jpg

    2) I will need to...
  16. Replies
    25
    Views
    1,621

    Ok the vent riser comes out of the slab and has...

    Ok the vent riser comes out of the slab and has 10.5" clear up from the floor before the sink tees into it. As I understand it, I can forget the shower drain and all the previous drawings and tee...
  17. Replies
    25
    Views
    1,621

    The vent riser is 2" CI. There is a sink not...

    The vent riser is 2" CI. There is a sink not shown in the diagram that tees into this vent. There's a toilet in here, too altho I don't know where that vents. I will take a better look and see...
  18. Replies
    25
    Views
    1,621

    Hey Terry... For venting I was hoping the...

    Hey Terry... For venting I was hoping the existing shower vent would work. But it won't so see if the below diagram will work, utilizing the existing bathroom vent which I can tie into.
  19. Replies
    25
    Views
    1,621

    Is this an S-Trap? Would this layout work with...

    Is this an S-Trap? Would this layout work with the existing shower vent?
  20. Replies
    25
    Views
    1,621

    Thanks, Terry. Yes, there is a vent going up...

    Thanks, Terry.

    Yes, there is a vent going up the opposite shower wall which is over by the sink and toilet in this bathroom. When you say I want to use that vent, do I need to tap into it from...
  21. Replies
    25
    Views
    1,621

    Thanks, hj. So what steps need to be taken to...

    Thanks, hj.

    So what steps need to be taken to do this properly? I have attached a drawing of what we got. I have the drain opened up back to the horizontal pipe. I can build back from there...
  22. Replies
    25
    Views
    1,621

    My main concern here is the standpipe and trap. ...

    My main concern here is the standpipe and trap. The shower trap was 2 feet below the slab underground. Can I keep it here and just extend the standpipe from there or should I move the p-trap up...
  23. Replies
    25
    Views
    1,621

    Converting Shower Stall for Laundry Service

    Afternoon, fellas. House is a 1971 slab on grade build in Miami FL. DWV is CI. Supplies in copper.

    I have an originally installed shower in the garage that's not needed. I'd like to stack my...
  24. Okay fellas got a cheap drain cam in there and...

    Okay fellas got a cheap drain cam in there and spotted what seems to be a flexible fernco fitting that is flexing a bit about 16" in from the pipe opening. See below.

    ...
  25. Thanks for the replies. :D Yes, the point...

    Thanks for the replies. :D

    Yes, the point of where one should stop is what is plaguing me on this one. Over at JB they are of the opinion that I should at least work my way out of the shower...
Results 1 to 25 of 27
Page 1 of 2 1 2