Search:

Thanks vavleman I thought I had to run bigger wire to the pressure switch after breakfast here I will wire that part up thanks for everyones help

Thanks I am going to wire it up tonight

The diagram dose not exactly show where they go on the pressure switch

That's what I have. so if I hook the control box up like what the diagram says ill be good? The SW goes to the load contact in the pressure swich and L2 goes to the line

The well guys left it there wasent a manual just a diagram. Its a deluxe 3hp controlcontrol box with a few difernt things inside but 6 connections

What is the SW contact in my control box

On the control box I have sw,L1,L2,r,y,b that's it I might have the colors wrong I don't have box in front of me and I didn't see any markings on pressure switch

I just had pump and pressure tank installed at my new property now I need to wire breaker the deluxe 3hp control box and pressure switch I am confused the pump directions say different from control...

Thanks both of you for th replies Monday I am going to sit down with my well guy and hack it out. Thanks for the insight on the tanks and the csv.

Do I still need the fancy control box with the csv

That's funny. So you would use the 18gs20 with csv

Thanks valveman Is there a pro or con on using 50/70 or 40/60

Thanks for the reply they use sch 120 with threescore ends and stainless or brass fittings for strength when I look at the chart on the 18gs20 there are no numbers if I go below 260 the gpm drop fast...

8 gage wire and flexon or wellmate composite tanks

Thanks for the reply they are using sch120 PVC with stainless or brass fittings and 8gagethe wire on both pumps and 86 or 119 gallon Gordon or wellmate tank

hello I am trying to pick a well system. I know little about wells. I purchased this land and the well was already here. had well company inspect, flow test and water sample. well depth is 340,...

The logged started at 241' and 13 gpm and in 15 minutes it stoked to 248' and 22 gpm and pretty much stayed at 248' for another 1 hr and 40 minutes

I just purchased some land with a well but no pump had the well flow tested at 22gpm the well is 343' deep static is 241' the well outfit gave me 3 pump options Gould's 2 HP 10 gpm, Gould's 3 HP 13...