Thanks for all the input guys. Is a 1 cubic foot unit equal to a 32000 grain unit?
|
|
|
Type: Posts; User: Phillbo; Keyword(s):
Thanks for all the input guys. Is a 1 cubic foot unit equal to a 32000 grain unit?
Found the report from last year:
Hardness is 250-300
Iron - 0.84 Max
Manganese-0.12 Max
http://www.scottsdaleaz.gov/Assets/Public+Website/water/2012WaterQualityReport.pdf
Water is very hard in my city but not a lot of metals/minerals. I don't have real numbers but that is what I have been told by a city worker.
We are simple water users and do not have huge tubs...
Thanks for the insight. How do I size the unit I need? I have a 2100sf home with 2 adults living in it.
My current GE softener has become more work than it's worth so I'm going to replace it. I'm thinking about getting this unit:
http://www.americanhomewater.com/patriot.php
Any opinions from...
Pulled the Venturi apart and everything looks fine. Anything else that could cause the salt tank to fill with water?
My GE Smartwater softener is filling full of water in the tank where I add the salt. It's never done this before. Any suggestions on areas to investigate? The water is about 1.5' - 2' deep.
...
Sink and Toilet get daily use.. It's just the tub that only gets used a couple times a year. AC drains outside.
I'll try tightening the toilet and see what that does .
Huh.. my toilet rocks a bit too. I thought they were suppose to.. may be something as simple as needing to be tightened.. I'll try that firs and if it persist I'll give the new gasket a try as well.
Hello, on occasions I get a sewer smell in my house. It appears to be coming from the guest bath that does not get a lot of use. My thought was that the water in the tub trap would evaporate over...
I'm sure my house has copper pipes... how far out the spout would the pipe extend? Not sure what kind of saw I could use to cut the spout down it's length .. Maybe a good job for my dremel.
I'm replacing it because it's old and corroded and does not divert all the water to the shower head . The problem is I can't get the plastic liner to break free and pull off. I took the screw all the...
My bad.. I did tub hardware search and I'm talking about the "spout"... the part that fills the tub and you pull out the little knob and the water diverts to the shower head.
I can get the...
Hi guys, tub faucet/diverter is original 30 years old Mixit set screw version. I removed the set screw but the faucet is stuck on there pretty good.. I don't want to prying on it for fear of breaking...
I want to replace the valve/handle .. are you saying I can't replace with a different brand / model ? Don't knew faucets come with a new cartridge that fits the valve?
...
Thank you for providing such a wonderful resource!
Cool, thanks for the help... Anyway of telling buy the pics which NoMix Cartridge Model i would need to order? Also , any special tools needed to remove and install the cartridge?
I don't have...
OK.. not sure why my thread was moved into this one... Is someone trying to tell me I need a nomix cartridge too ?
Hi all,
Can you assist me in identifying this shower valve. Is it a cartridge type ? I'm replacing all the hardware in the tub/shower and hope to not have to pull it apart to identify the...
I was in Greer on Monday helping a friend evacuate her parents cabin, they are in Germany on vacation...It's a mess up there. Ash was falling like snow.
This is going to be the biggest fire in Az...
Had a leak under my sink.. took a look and water is coming out of the red reset button when the sink is on.... What causes this? Has the bottom rusted out ?
Off to Home Depot this afternoon...
Many Thanks for the input !!
So, it sounds like the faucet needs to be replaced then .... Water is definitely dripping out of the big hose and crimping it off will just drive the water out of the air gap..
The installer said he 'by passed' the faucet.... I'm going to call the company owner tomorrow and ask him to come take a look at the install... there is water dripping out of the larger of the 2...
I had my RO system replaced but had to keep my existing faucet to match the rest of my sink hardware. There are 2 tubes (one red and one black ) that hang down under the sink and are not connected to...