Search:

Thanks. This was installed in the late 30's. The 1 1/2" galvanized coming out of that trap runs 5' into the 4" cast iron soil stack, via a wye on the cast, which rises right up to the roof. The...

Thank you both

14290

Hi, when I get done replacing my old galvanized 2" waste pipe taking the kitchen sink water from the front of the house I want to replace this trap shown. Coming down from the bathtub above,...

Not a pro-but I have a similar problem, have a backflow preventer in the line, it's got a one way flapper and a wheeled gate valve. I relied on the flapper this time, big mistake, either the surge...

Anyone have experience with a good brand/model of an undersink water filter system? I have a GE one I installed where the faucet is leaking and a new faucet cartridge to fix it is going to cost...

Hi, the guy who rebuilt and sold my friend a home put in 3 Briggs toilets. I have read the various reviews & threads on these, I have no idea if these Briggs are vacuity or not. One of them, even...

Thanks. I had shortened the chain by moving the clip but did not cut off the links I bypassed. I just shortened it a little more and that helps since the flapper goes up at a higher angle when you...

I replaced my fill valve in a Toto toilet so I decided to replace the flapper also which was about 10 years old, with a Korky 3" flapper, the one that has an adjustment feature. But the old white...

I replaced my fill valve in a toto toilet so I decided to replace the flapper also which was about 10 years old, with a Korky 3" flapper, the one that has an adjustment feature. But the old white...

As hopefully shown in the attached diagram, my under kitchen sink wastepipes have a vertical nipple, (1 1/2" OD pvc) coming down into an old J trap, then the short end of the J trap goes into a...

I just had new pumps installed in my sump. I have a high water table, I have french drains feeding a lot of water, especially during storms, into my sump. My sump liner is a standard plastic one sold...

Today I put a new cover assembly in w/out replacing the actual heating element & it was a PITA. I did not want to drain the system & sweat a new element in, complicated by fact it was in a small...