Search:

I perfer the braided stainless steel washing machine hoses. Im not a big fan of the pex supplies, they are an economical way for the contractor to supply water to a fixture. Look at the plastic...

do you have any vents on this new bathroom you installed? was it inspected? did a plumber complete the work? when you flush the toilet, does the water come all the way to the rim? swirl? is the...

whats BS is this guy said he was a plumber, etc etc etc, he isnt even a licensed plumber, he "dabled" in the trade. no respect from me. he is just a poser!

Didnt he have tax issues also? Like,...

access panels are always great, especially when it comes time to remove that roman tub valve.

post a picture of the stem, turn the water off, remove the handle, remove the stem. thats a great way to identify the parts needed.

Sounds like a camera inspection is needed also. I agree with Ron, call a friend, get a referall of a licensed plumber and have them come and check it out. you need professional help and it sounds...

I would check the attic if you have one, see if the vent goes all the way out, also check the fart fan hose, make sure it is connected, check the vent pentetration through the roof, make sure it isnt...

Maybe post a picture of your main shut off valve ? I agree with the others, sometimes the valve feels open but the disk hasent opened all the way. Is the handle just turning and turning and not...

agree with mcconnel

If its not illegal to have your area drains tied into the sewer, you can put in a back water valve, but I would seperate them as earlier instructed.

trim against fiberglass always leaks over time as the escusions loosen up from use and the fibergalss flexes from the temp changes. I always make the sure the valve is strapped really well, then try...

I have installed both Brizo and Delta faucets, kitchen and Lav, I didnt notice much but the box difference and the price! kitchen faucets had the same junk pex lines attatched to them too

You have the distance and the fixture units but I didnt see the high low water pressure. I personally would run copper underground to the house and run pex inside the structure. If your sizing is...

I know you have 6 of these in your house, but I would just replace them. Old Kohler is expensive to repair and a ton of the aftermarket parts are horribly made and by reading your last post, you are...

I have always used Coast products. Never had an issue, I wouldnt mind getting a catalogue. You guys have hte best B1X'S on the market!

I would pull the drain valve, install a 3/4" nipple and a ball valve and flush the unit. Jim is probably right, sediment in the bottom of the tank

I think this is a shower head not allowing enough GPM to flow through keeping the flow switch of the unit on. Change the shower head and I bet you will be fine

this is either a venting issue or a gas valve issue. the unit sounds like it starving for gas or air. I have also had fan speed issue that result in this noise, especially when the air is heavy in...

I had researched this problem on a tankless repair once, the gas company red tagged the unit, the gas valve was faulty, after replacement, the smell went away. I bet Navian has a batch of bad gas...

Yes, you will need an expansion tank if this is a closed system. tank or tankless, it does not matter when it comes to an expansion tank.

Maybe you would like to research Noritz or Rinnai, are...

Is this room above a crawl space? If so, is there an odor? possibly a broken drain under this room?

Grohe is a great product, they have come out with an "Everyday Line" which has a much better price point for the average customer. Also, if you do a goose neck, with a pull out sprayer, get one with...

What model number Moen is it? maybe a cartridge problem.....