(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: Dean M; Keyword(s):

Search: Search took 0.12 seconds.

  1. Finally a working furnace!!! I replaced the...

    Finally a working furnace!!! I replaced the control board which had a bad motor relay. It was burnt right behind the relay where it is soldered in. I ended up paying $49 for a new control board. A...
  2. After replacing the pressure switch the furnace...

    After replacing the pressure switch the furnace ignitor will glow and the burners will kick on. After about a minute the main blower motor fails to start and the unit shuts down. The next thing I...
  3. Thanks Jim, I took apart the draft inducer, the...

    Thanks Jim, I took apart the draft inducer, the exhaust pipe and cap and the hose. I then cleaned everything thoroughly and checked the hose for any cracks or splits. There were no obstructions in...
  4. Thanks for the info Thatguy. I will purchase...

    Thanks for the info Thatguy.

    I will purchase some hose and try the test. If that is succesful and I need a pressure switch can you recomend a web site to purcahse one? The furnace is a Ducane...
  5. Ducane furnace not lighting. Draft inducer or pressure switch?

    OK, I have narrowed down my problem to the draft inducer motor or the pressure switch. Here is what I have tried:

    When I apply suction to the pressure switch the ignitor will glow and the furnace...
  6. Ducane furnace still not lighting. No power where ignitor connects to smart valve.

    On Sept 28th I posted the following: Ducane Furnace model # MPGA07583A. When I turn on the thermostat the exhaust fan turns on for about 25 seconds then the unit shuts down. The error code...
  7. Replies
    2
    Views
    2,654

    Thanks EH, I will give it a try and post the...

    Thanks EH,
    I will give it a try and post the results. Do you know of a good site where I can order the part from. Everything I have looked at here locally is super expensive! Thanks again!

    Dean
    ...
  8. Replies
    2
    Views
    2,654

    Ducane furnace will not light then shuts down

    Hello,

    I have a Ducane Furnace model # MPGA07583A. When I turn on the thermostat the exhaust fan turns on for about 25 seconds then the unit shuts down. The error code blinks 3 times then...
  9. Replies
    8
    Views
    38,386

    Speedbump, thanks for the reply. It turned out...

    Speedbump, thanks for the reply. It turned out to be a waterlogged tank. the well screen is also plugged. I am also going to treat the well screen with tabs and flush with water as you...
  10. Replies
    8
    Views
    38,386

    shallow well

    Bob thanks for the reply. I put in about 48' of 1 1/2" pipe. Can you suggest a good quality switch? Today I was planning on pulling the pvc pipe and replacing it along with the foot valve. I was...
  11. Replies
    8
    Views
    38,386

    sand point well

    Bob thanks for the advice. I will check the things you mentioned.
  12. Replies
    8
    Views
    38,386

    shallow sand point well problems

    About 9 years ago my father and I sunk a sandpoint well. We went down about 50 feet using 2" galvanized pipe. I installed a well x trol pressure tank model wx302 and a 1 h.p. standard Fairbanks Morse...
Results 1 to 12 of 12