(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: ndog; Keyword(s):

Search: Search took 0.16 seconds.

  1. Replies
    6
    Views
    1,389

    Thanks Terry I read that and it's cleared a...

    Thanks Terry I read that and it's cleared a little up, I guess the only thing I don't understand is since the tub trap connects to the flat 3"(via a rolled 3x1.5x3 wye) which then goes up the roof...
  2. Replies
    6
    Views
    1,389

    I suppose a related question is can anyone...

    I suppose a related question is can anyone recommend a good book that explains the theory and practice behind venting? I can't find any posts anywhere with a vent setup like mine and I'm still trying...
  3. Replies
    6
    Views
    1,389

    Relocating venting for my tub.

    I'm trying to install a new tub and I need to modify my plumbing slightly as the new drain needs to be on the other side of the floor joist. I'm trying to avoid drilling a new hole and to reuse the...
  4. Thanks, normally I buy moen or delta faucets but...

    Thanks, normally I buy moen or delta faucets but this particular PP model is exactly the look I'm going for and delta/moen do not have equivalent trim. If there's no reason not to use this valve ...
  5. Replies
    4
    Views
    4,309

    I've used aquamix sealer on recommendation from...

    I've used aquamix sealer on recommendation from john bridge too. It worked great! I found it at a local hardware store. Another place to try is looking up tile stores in the yellow pages or on google...
  6. "hammer arrestors" on tub/shower mixing valve & a question about PP 0x8 valves

    I'm considering updating my bath/shower fixtures as the wall is open and they're looking dated. Right now I've got the standard moen clear acrylic knob pull to control flow and turn to adjust...
  7. Replies
    5
    Views
    1,233

    Is an above floor drain my only solution?

    A few weeks ago I was here getting some good advice on purchasing a tub. Now that the project's started I've run into a huge snag. The old tub was an above floor drain model but I didn't know this...
  8. Replies
    8
    Views
    3,495

    I went to look today: home depot, lowes, rona, a...

    I went to look today: home depot, lowes, rona, a local hardware store and a plumbing supply. Not a single one stocks cast iron or americast(brand or type) all are special order and astronomically...
  9. Replies
    8
    Views
    3,495

    Cast iron would be nice unfortunately we pay more...

    Cast iron would be nice unfortunately we pay more for some things for really no reason; I'll have to check out hd but the list price on that tub is $688 here (usd and cad are 1=1.) If it was a...
  10. Replies
    8
    Views
    3,495

    Budget tub shopping questions.

    backstory: I'm in the middle of doing a bath facelift and after tearing down the tile surround I managed to scratch the porcelain coating in my tub that I was planning on keep despite the...
  11. It is accurate, the only thing that's missing is...

    It is accurate, the only thing that's missing is there is a clean out plug on the bottom of the trap's u shaped piece. It was installed by a licensed plumber I guess about 10 years go.

    It hasn't...
  12. Thanks for the help! The abs is 1.5" and the...

    Thanks for the help!

    The abs is 1.5" and the tail off the drain is 1.25" If I put a 1.5" x 1.25" trap adapter on the top of the trap the tail piece is over the side of the threads by just under...
  13. Any tricks for dealing with misaligned sink drains?

    I'm doing a minor bathroom update, new paint and new sink/toilet/fixtures. But I've run into a problem installing the new sink. The abs p-trap comes too far out of the wall to line up with the drain...
Results 1 to 13 of 13