I didn't use any thing to seal between the spacers. What do you recommend using?
|
|
|
Type: Posts; User: hondatech; Keyword(s):
I didn't use any thing to seal between the spacers. What do you recommend using?
How can you tell if your toilet is leaking between the toilet and the flange. I redid my bathroom last year and installed ceramic tile. I added two spacers between the flange and toilet to compensate...
I had a water guy come out and give me an estimate on what I need. Here's my water quality
ph7.6
hardness 14
iron 1
nitrates 0
TDS 315
copper 0
chlorine 0
CO2 0
I bought a test kit from Home Depot and this is what I found;
Well i bought one of those water tests and heres what I got.
ph 7.5 safe
chlorine .2 safe
alkalinity 180-240 high
hardness 250...
Whats the chances of you posting a photo? Sounds like a neat setup.
Oh by the way class of 1995 here. I sent you a bmail.
Yes to both.
I just checked out your website and noticed Nescopeck. I graduated from Berwick. We had the water tested when we bought the house last july. We have high iron hard water our ph level wasn't that bad....
I have a well system and qest pipes. I have rust particles coming out of all my faucets. We have had a lot of rain here lately too if that matters. Whats going on?
Is there something I can do around the outside perimeter of the house? Is water more likely coming in through the block or by hydrostatic pressure?
I have a rancher style house with a crawlspace. I live in Maryland right off of the Chesapeake bay. I have a high water table and my soil is practically clay. That being said, I have a trench around...
Well I did it a couple of hours ago. I must say I like the sharkbites. It was a sinch. I got everything hooked up and no leaks! Thank you for your help.
Heres what I've decided to do. The compression t fitting Im going to remove and replace with a sharkbite t fitting. Then I bought cpvc to go up to a valve for faucet supply and cpvc to another valve...
That tool and clamp is very similar to one that is used on cv boot clamps. Yes that is very easy for a diy'er. Thanks im gonna save this for future reference.
I am up for doing whatever I need to fix my problem sweating or pex all short of replacing all of our pipes for now.
The copper T that is in the pic can I eliminate the qest all together and tie in...
I am redoing our kitchen and in doing so I need to change some of the plumbing under the sink. I've got all the new cabinets in and am trying to get all the plumbing I can get done before the...
No good advice?
Another dreded quest topic.
Well I have a few questions. Maybe really only one or two. If I decide to replace my qest piping what would be the best replacement? I have well water if that plays a...