Search:

Bump for help.

I can't get this soldering thing figured out. I just can't get the solder to suck into the brass shower valve. The solder will begin to melt but it won't suck it in. I know it's hot...

Yes this will be a kerdi shower should have mentioned that before. :) Is it really that critical to mock up all of that for a differential of perhaps a 1/4" in thickness? I am weeks away from tiling...

Got it! But there is no finished wall? I know I need to add 1/2" for the drywall but what about for the thin set and tile? Will I have some wiggle room or does it have to be right on?"

Here is the install book if anyone would like to take a look. Another question- I haven't received the body jets yet, but in the diagram it shows two supply lines going to each bodyjet.

Is there...

Guys-

I am installing a moen 3330 3 function valve as well as a moen 243 trim kit. This is the one with four body jets. The instructions are horrendous.

My question are:

Can you provide...

Terry, thank you for the reply, but the 3" stack is a wet vent if I am understanding wet vent properly. The 2" horizontal pipe runs from the tub and shower to the 3" pipe. The 3" tee goes down and...

BUMP for more info and advice please

To the left of the Y is the bathtub drain.

Here is a better picture where you can see the stack.

To the right it goes to the stack or the wet vent, I believe that's the right terminology. This is a 3" stack with a pipe going up and one going down to the sewer I think. To the left is the trap and...

Wow, that was fast! Sorry I was editing the post to add more and you already replied. :)

A guy over at the John Bridge tile forum suggested I come over here for some help. I am in the process of building a shower. I recently put in the plumbing and a few of the guys over there are...