Search:

Thanks again for the answer. I will put the check valve underground near the connection point of all the wells.
Bob

Thanks for the quick response. I will try that today. Can I have two check valves?
Thanks
Bob

I have a shallow well with 4 points at about 17 ft. I have a check valve right before the intake with a filter after outflow. I turn my centrifugal pump on and let it run for about 5 mins. and get a...

I lifted all my sandpoints up about 5-7 ft. and am getting over 30 gpm. I was the one who was aksing a while back about only getting 12 gpm and how I could get more. The problem now I am having is I...

I'm a meterologist and this is fasinating dicussion about lawn watering. I think the best solution is to have a weather station properly set up at site or at a corner of development and everyone use...

Thanks for the replys. I will check with a store about possible options. What about getting a storage tank with a pressure tank?
Thanks
Bob

I have 4 sandpoint well 23'. With a 1 hp pump it can produce 15 gal. per min. for about 7 mins and then it goes down to 5 gpm. How many sprinklers can I put in one zone? What is the average run time...

What's all this about drawdown and recovery? Is that the problem I'm having with my well?
It puts out 15 gpm for the first 5 mins. and then only 5 gpm at that.
I'm at a loss.
Seems like your...

I have 4 sandpoints at about 23' all connected to one pipe equal distance apart. I have a 1 hp Flotec pump and the size of the pipe is 1 1/4. For the first 5 mins. I get about 15 gpm then after that...