Search:

Fixed..... I ran a new low voltage line from the control box to the valve and everything works great. Must have been a cut in the wire somewhere causing the 2 wires to make a complete circuit all the...

There is no settings for program B but I did read that there can be problems where they hold settings in memory even though you do not see them. It says from rainbird to remove battery and fuse for a...

Update: I checked the power with a voltage meter in the valve box and verified both the red and blue have power when zone 1 or 2 are on. I then went back to the split and there was power on both...

I think I know what might be causing this and will test this weekend. I think the red and blue wire may be touching each other somewhere between the controller and valve box causing it to complete...

I think I know what might be causing this and will test this weekend. I think I may the red and blue wire may be touching each other somewhere between the controller and valve box causing it to...

Correct. It comes out of the house from the control box then splits only the red, blue and white go to the one valve box and the other colors and white go to the other valve box.

Would it be the wiring to the solenoid crossed? Because I can trace the blue, red and white all the way back to the control box and it looks good. One thing I did not look at was the white wire in...

For some reason I have 2 zones that are coming on at the same time. I have verified at the controller that there is only power to one zone at a time. I then traced the wire to where it comes into the...