Search:

Yea I don't have a hole saw .What is a LB/Chase nipple and what does it look like?

As far as the pvc/flex joint. What is a better way of getting it under the sub or is there an adpter to fit it in...

oops the pic may be too small.
http://i224.photobucket.com/albums/dd232/hilbutterfly/DSC00962-1.jpg

Obviously I decided to go with a metal panel.

http://i224.photobucket.com/albums/dd232/hilbutterfly/DSC00962.jpg

Ok
I like you guys to look at this and give me your expert opinions.
The diagram shows the neutral and ground on different bars. If you look at the sub I have here, there is only one bar. I bought...

Oh ok ,I was just planning on taking nm out of structure and run it the 5' in conduit to panel.

I just assumed they would be available but never checked on that yet, not to mention the price. I usually never have trouble locating things here in the city . I'll let you know tommorow.

Bob, If I run nm thru the attic and out the soffit down 5 feet to a sub panel, Do I still need to run THWN wire for the exterior 5 feet pre-sub portion?
If so where will I splice down to Thwn?
I...

Thxs Alectrician & Frenchelectrician

Hey French, here is a link to the box I'm looking at ,. tell me what you think.
...

I should be ok with the six feet rule. It might end up between 5 -6 feet anyway.

No it did not. This is a used spa handed down to me by a friend.
I will try and find out the spec on it.

Thanks Petey and Alectrician
I value all your advice and I will follow the given instructions.
Aaand I am sure I will have another question on this very topic as soon as I go to the next step (i.e....

The dryer breaker is 2" wide and I discovered that HD has a 30 amp 2 pole breaker but half the width or @ 1".and a 50 amp 2 pole cbrkr 1" wide as well. I was thinking of taking out the double wide...

I'm not exactly sure what you mean when you say "twin up" but, here is a link to a couple of pics of my service panel. Tell me what you think.

...

Thanks Aelectric and Petey.
I got confused there for a minute but, that (6/3) is what I was planning to use I just wanted to consult with you all first.
Just went out this morning and bought 6/3 wg...

Thanks guys for the info.
Petey, here is an image of the diagram. I'll try and post maybe this will answer this question. 3125


So do I use 6/2 nm x2,run them together and use one of the...

OK what about installing a breaker for this when my service panel has only one slot left and a 240v brkr not being used?

Thanks for replying Speedy Petty.
This next question will reveal my electrical skill level but never fret I follow good instructions. ..So what does "nm" exactly mean? lol. I thought that was your...

Hey guys any help you could offer this fearless D.I.Yer would greatly be appreciated.
I'm getting ready to wire a Spa (hand me down)that will be installed in my back yard. The challenge is how to do...