Search:

Thanks for the quick reply. Much appreciated.

Chris

I just ordered the Toto Washlet E200 and already have the Toto Aquia III toilet, which btw is an amazing toilet, I have two of them. I see the comment about the THU9090 adapter required, so I...

Thanks for your detailed response. I should have updated this thread, but the solution was a bit embarrasing. For this project, we had installed shutoff valves under the house. The cold water was...

Here's an update. We are going with a 3/8" frameless neo angled glass walls with a chrome header on the entire top edges of the glass. Yes, it is still called "frameless" even if it has a frame...

That seems a little unfair. I have a Noritz tankless and it works flawlessly. I've had it for less than a year now. It replaced a 50 gallon tank water heater that also worked just fine. I have no...

Yes we are sure the hot and cold are not reversed. Just solved the problem however. It turns out the cold water was shut off under the house to the new bathroom. Dohhhh. It now works exactly as...

I am having problems with my Grohe 34 122 thermostat mixer and just can't seem to figure out what the problem is. The parts are all brand new. The problem is that the temperature cannot be adjusted...

I got a third bid from another company and yet another approach to the job. They bad-mouthed the glass header approach. This one I kind of like. They proposed using 1/2" glass on the long glass...

A good visual for the glass header is the type of wood header you would put over a door or a window. In this case it's a glass door and the header is glass as well. It's attached to the glass walls...

Thanks for the link. I had already discovered that link by googling. It's actually the best one I ran into. Re-reading, I find that they make no mention of a glass header. All they talk about is...

I hate those fiberglass shower stalls. I just ripped one out. Sure, it didn't leak for over 20 years. I think they look terrible and are really hard to keep clean. I used it everyday for 20 years...

Yea, I guess that Hans Grohe stuff is nice. I just bought a Grohe on a slider for considerably less than a grand. I've had one in the other bathroom for over 10 years with no problems at all - it's...

I'm putting a nice corner tile shower in and wanted to go with the "frameless" glass look. The tile will be all the way up two walls, but not on the ceiling. The glass walls will not go to the...

I have these types of Moen faucets on the bathtub and sink in our guest bathroom. I truly detest them and regret ever buying them. They have all stripped over time and you can't find the spare...

Well I just couldn't stand having this brand new toilet sitting here and the old one out. Seemed to me that it wasn't that much additional work installing the Toto. So I did. A diamond tip drill...

Ok. Well that's food for thought. But I was basically almost to the point of redoing this floor anyway. This seals the deal I think. After closer examination, it looks like they built up 3/4" of...

Yup. Just popped the floor trim off under the door. I can see Linoleum on top. Tile just under that. Then about an inch of morter under that, then the sub-floor. I guess the project just got a...

I have the CST464 Dual Flush. This model has a skirt on it. They give you a template and there are two plastic mounts that the base screws into. These mounts require you to drill 4 holes in the...