I have a basement laundry sink that is currently connected to a very old (probably galvanized) drain pipe that is buried beneath the basement floor. This pipe will not stay unclogged. There is...
|
|
|
Type: Posts; User: darmstro; Keyword(s):
How many fixtures on a single 1.5" PVC drain pipe?
I have a basement laundry sink that is currently connected to a very old (probably galvanized) drain pipe that is buried beneath the basement floor. This pipe will not stay unclogged. There is...
I am going to seek a second opinion from another...
I am going to seek a second opinion from another experienced plumber. I think the first plumber is being straight-up honest (and the price doesn't seem unreasonable). Nonetheless, it's ALWAYS...
The water pressure is very good, despite the age...
The water pressure is very good, despite the age of the line.
I think this plumber is definitely playing it...
I think this plumber is definitely playing it safe. . . and I'm not certain I wouldn't do the same if I were in his shoes.
In the City of Hammond, Indiana, the HO is...
In the City of Hammond, Indiana, the HO is responsible for the waterline from the meter to the B-Box.
Main water valve replacement
O Great Plumbing Sages:
The main water valve for my 100 year-old-house is leaking. It leaks from the top of the value around the stem. The valve is connected to galvanized pipe on both the...
Zoeller M-53 cycle "on" time
O' Great Plumbing Sages:
I recently installed a new Zoeller M-53 pump based on positive comments that I found on this site. The pump works great and is not nearly as noisy as the old plastic pump...
Yes, Redwood, I can access from the basement.
Yes, Redwood, I can access from the basement.
Toilet Flange Extension
O' Great Plumbing Sages:
I'm about to install a new floor in my Mom's bathroom. Removing the old sheet vinyl will be near impossible, so we are going to install new underlayment and Durastone...
OK, once the heat trap ball bearing pops out, ...
OK, once the heat trap ball bearing pops out, what do I do with it? Should it be replaced? What in the world is a "heat trap ball bearing"? Never heard of such a thing. Thanks!
Rattling Water Heater
Oh Great Plumbing Sages:
My mom's water heater has developed a rattle. The rattle appears to be coming from the hot water outlet. Of course, it only makes this noise when water is flowing. The...
Sizing pipe for a new hose bib
O' Great Plumbing Sages:
I'm about to install a new hose bib so that I don't have to drag a 75' hose around the yard anymore. The location for the new hose bib is about 25' from the nearest...
I didn't think so . . . . thanks!
I didn't think so . . . . thanks!
To flare or not to flare
O' Great Plumbing Sages:
When installing new undersink shut-off valves on to new 1/2" copper pipe, does the end of the pipe need to be flared before the valves are installed???
Inserting a Tee into an existing copper line
O' Great Plumbing Sages:
As am planning the routes for supply lines to my bar sink, I'm a bit cornfused about how to go about inserting a Tee into an existing supply line without having to...
Thanks, Senior Members! I'll do the install and...
Thanks, Senior Members! I'll do the install and report back later on the results.
As it makes its way out of the sewage sump, the...
As it makes its way out of the sewage sump, the vent is 1-1/2" for the first four feet then it becomes 2" for the balance of the run that I can see in the basement. After that it takes a turn upward...
Venting a Bar Sink
I'm installing a bar sink in a remodel project. The bar sink will be located in the basement. I plan to drain the sink into a sealed pit that contains an ejector pump that empties into the...