I'd like to try do DYI on a new kitchen sink and half bath that I've posted about b4
The #1 issue right now is cutting out some cast and connecting PVC there is old cast all on the horizontal run....
|
|
|
Type: Posts; User: petros151; Keyword(s):
I'd like to try do DYI on a new kitchen sink and half bath that I've posted about b4
The #1 issue right now is cutting out some cast and connecting PVC there is old cast all on the horizontal run....
Wow thanks for this tip!
I redid the diagram. So then I would need to run a 2" pipe as the drain pipe into the horizontal sewer line ( A and B) as shown and then connect
a 2" elbow and a 2"...
ok this may not be too hard after all. Funny thing one plumber came over and told me I could vent a sink drain below as in the first drawing, what a problem that would have been if I had not posted...
how about this?
by the way does the horizontal vent pipe have to slope up ?
THANKS!
ok thanks, that dashes my plans for an "Easy" way to vent. I'll rethink this. In the meantime anyone have any ideas? There is no way to run vertical pipes that I can see. Maybe one way is to put the...
I need some advice on venting/. It would be very difficult for me to run a vent line except in one place where I can get it up to the roof and out.
I'd like to use "Y" connections as in the...
I live in a small town The meters are no frills but there is a little hard to see valve running in parallel with the gas pipe coming from the ground to the meter. You have to use a crescent wrench...
thanks for the info . I need to correct my description
I would not have multiple vertical stacks but 2 horizontal runs. Here is a diagram what is blue is new what is brown is old Cast iron. All...
I posted this in the UPC section but I think it should have gone here. sorry for the dup.
I have a potential problem. I have an old house there was originally no plumbing (1900) and an out house....
I have a potential problem. I have an old house there was originally no plumbing (1900) and an out house. At some point they put a full bath in upstairs and it is
plumbed in the floor and vented...
AFTER THE REPLY I SAW SOMETHING:
this was my original
I have a 1900's 2 floor with full attic home there is only one vent for the whole pluming system. So far there are no problems with existing...