(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: Nick Gibb; Keyword(s):

Search: Search took 0.10 seconds.

  1. Replies
    7
    Views
    3,766

    What can you tell me about the TOTO Reliance???

    I have the possibility of being able to purchase a Toto Reliance toilet with a 10" rough in at a STEAL of a price. I believe it is a discontinued model, so I wanted to get some input, review,...
  2. So, I looked at the installation instructions for...

    So, I looked at the installation instructions for the Toto Aquia toilet and noticed that there is a "Socket" (the term they use in the installation instructions) that is supposed to attach to the...
  3. Replies
    0
    Views
    480

    Pressure against copper pipes????

    When mounting the brass fitting for the rainhead shower feed in the shower i am working on, I had to put some pressure on the fitting to get it to sit against the wood (creating a little bit of...
  4. Chrome nipples to copper water feed lines???

    As I am rehabbing the bathroom in our rental condo, I need to lengthen the water feed pipes for the bathroom sink and toilet water feed (as the walls are being moved forward)

    I was curious if I...
  5. Wow Jadnashua....it is really an honor to meet an...

    Wow Jadnashua....it is really an honor to meet an Olympic gold medalist. What year did you win your gold medal in the wet blanket toss? So far both times you have answered my posts it has been to...
  6. I have a finish question. Once I install the...

    I have a finish question. Once I install the linear drain (into a channel cut 1" to 1 1/2" deep into the floor), what should I use to fill both around the linear drain as well as the area already...
  7. Terry, Thank you so much for your input. I...

    Terry,

    Thank you so much for your input. I will take some photos of the project as I reinstall the new toilet (after a lot of other bathroom work) and post up the results.
  8. So more like this? 15904 Do I cut off the...

    So more like this?

    15904

    Do I cut off the old flange or does the replacement ring just go over it?
  9. So just so I am understanding this right, you are...

    So just so I am understanding this right, you are suggesting I offset just the flange? Something like this:

    15901

    (The red being the flange and the blue the existing drain hole) Would I cut off...
  10. As I have never gotten this involved in plumbing...

    As I have never gotten this involved in plumbing renovation before, could you please explain to me what the issue would be with an offset flange? I am not questioning your suggestion, I just want to...
  11. Photos of the rough-in distance from my walls

    I have attached the photos of where by flange sits in relation to the walls I am putting up in my bathroom. As you can see,
    15894
    15895
    the flange is only about 8" from the wall (that is the wall...
  12. Hidden tank toilet - Any with floor mounts???

    Since I have such a short rough-in for my toilet (less then 10") and I don't believe the corner toilet will work, I am looking at other options. One I was considering was a hidden tank toilet (where...
  13. The concern is needing a short rough in because...

    The concern is needing a short rough in because the drain hole is SO close to the wall. I will try to get some photos and measurements the next time I am up there.
  14. Where to measure rough in for "Corner Toilet"???

    As I remodel the bathroom in our condo, I have found that the toilet drain pipe is REALLY close to the wall (the last tenant actually cut into the wall behind the toilet to get the tank to fit) so I...
  15. John, Thanks for the suggestions. I am...

    John,

    Thanks for the suggestions. I am looking into a linear drain system, but wanted to get your ideas/suggestions based on my drain placement situation. As you can see from the attached image:...
  16. Converting from tub to shower - Drain questions

    I have removed the tub from a condo I am rehabbing and am going to go with a standing shower. The plan is to create a sloped mortar bed (single layer, no pre-slope) and seal the floor and walls with...
Results 1 to 16 of 16