(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: thompson1600; Keyword(s):

Search: Search took 0.11 seconds.

  1. Update yesterday; Held and worked all day. At...

    Update yesterday;

    Held and worked all day. At about 5 pm, went to the pump house and the little plastic hose from the pump to the pressure switch had blown off the barb fitting on the pump. ...
  2. No PVC, all galvanized or brass fittings. We...

    No PVC, all galvanized or brass fittings.

    We were just wondering if the colder temps could also cause the galvanized to expand or contract with temps to cause leaks.

    Also, about the water being...
  3. Both of these are ideas we agree with. We can't...

    Both of these are ideas we agree with. We can't pound right now. The pump house is to short and it's the middle of winter, but we are going to go deeper this spring.

    On a suction leak. How can...
  4. Update: Held pressure all night without...

    Update:

    Held pressure all night without starting pump (or at least staying on). Temperature was about -1 with windchills in the -10 area. Showers, toilet flush, teeth brushings this morning all...
  5. Update; Went out tonight about 5 pm and primed...

    Update;

    Went out tonight about 5 pm and primed it twice. Started right up working again, after having been shut off for about 30 hours.

    Worked great, kids took showers, filled water buckets,...
  6. Shallow well intermittent problems during February/March

    I have a shallow water well, 23 feet. We know it is in a good underground stream. It has been feeding another home for 30 years with no issues. We are not 100% sure we're deep enough but it has...
Results 1 to 6 of 6