(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: silversaver; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.11 seconds.

  1. As Dittohead mention in other thread, it is a...

    As Dittohead mention in other thread, it is a Clack safety float. Simply remove the pin, cut the rod shorter, drill a small hole on the shortened shaft, reinstall, good to go. It is not...
  2. Replies
    7
    Views
    695

    I'll try this method. I have the same 18x33 tank...

    I'll try this method. I have the same 18x33 tank and same problem.
  3. I have been using 7000 for 8 months now, love it...

    I have been using 7000 for 8 months now, love it but....

    First I did complain about the softner not getting the water soft enough, trying to increase the brine time but fail. After so many attemp,...
  4. For yorru info, but nothing to worry about since...

    For yorru info, but nothing to worry about since the new batch shouldn't have any issue
    ...
  5. I use the guy referral from Dittohead (Jason). He...

    I use the guy referral from Dittohead (Jason). He is good and I'm sure Dittohead can forward his info to you. I pay $700 for system (1.5 cu/ft, 8% crosslink, brass sweat, 32mm hi flow distributor)...
  6. the softners are much cheaper than before, I have...

    the softners are much cheaper than before, I have ask the same question almost 6 months ago. I got Fleck 7000 and they are ok
  7. Is it recommended that I replace the current...

    Is it recommended that I replace the current Fleck 7000? I don't see more water add to brine tank... but the water aint soft even with 15 lbs/cuft. thx
  8. The regeneration is setup at 4am in the morning,...

    The regeneration is setup at 4am in the morning, but I usually hit regeneration botton while we are out for dinner to avoid the noise late at night (too much noise). so there's no water usuage during...
  9. Hi Gary, It seems to be better than before,...

    Hi Gary,

    It seems to be better than before, but not the same as what I had before... I am currently using 12lbs setting with 0.25 BLFC, my salt time setting @ 32. Which 32 x 0.25 = 8 gallons of...
  10. My shows : 3356179-110912-0010 Is that means...

    My shows : 3356179-110912-0010

    Is that means mine were build in 11/09/2012?
  11. I'll try that, thanks Gary will it be enough...

    I'll try that, thanks Gary

    will it be enough time for water to dissolve 30lbs of salt on 2nd run if I manual regenerate one after another?
  12. After using the Fleck 7000 softner for few...

    After using the Fleck 7000 softner for few months, I have to said I had enough. I wonder how you people enjoy the "soft" water from this system. I'm not expert in water softner, but do you need to be...
  13. got it. I have already install the tube insert...

    got it. I have already install the tube insert which weren't install before. I'll check on next regeneration
  14. Dittohead, I'm not the expert as many of you...

    Dittohead,

    I'm not the expert as many of you here, so help me if you can on this question.

    Base on your cheat sheet set BF to 22 with 0.25 BLFC = (22 / 4) = 5.5 gallons of water into brine...
  15. Thank you Dittohead!

    Thank you Dittohead!
  16. After little over 2 weeks of usuage, I do enjoy...

    After little over 2 weeks of usuage, I do enjoy the Fleck very much. The flow rate were good and all the plastic smell were gone. The regenrate sounds were much louder compare with my old GE, so I...
  17. Replies
    21
    Views
    1,753

    +1 ...

    +1

    http://www.specsserver.com/CACHE/FILE2185.PDF

    WHES30 is very similar to my old GE Smartwater Profile. It will regenerate on demond or on calendar up to 15 day max.

    I thought my old GE...
  18. 1 out of 5 gallons of water. The question I...

    1 out of 5 gallons of water.

    The question I have is... I thought a RO system is a must if you are running a salt base softener. Water softeners do add sodium to tap water.. especially for those...
  19. That's the point. As I said, the water is more...

    That's the point. As I said, the water is more than that amount....
  20. Sorry, I'm lost. What do you mean of 3"s for...

    Sorry, I'm lost. What do you mean of 3"s for aircheck assy??

    There are more than 5 gallons on water in the brine tank. I'll do another regeneration tonight. I think if I wanna decrease the water...
  21. Thanks Dittohead, I just check the brine tank...

    Thanks Dittohead,

    I just check the brine tank and found the water were covering the 3 bags of 40lbs salt. Is that look right?

    18700

    I also found this on the brine well cap. It looks like...
  22. Great advise as usual, Dittohead. I do find the...

    Great advise as usual, Dittohead. I do find the water unclear and plastic smell when the system first install... after few backwashes and regeneration, it is muh better now. You are right, the water...
  23. The black system looks pretty nice. Just one...

    The black system looks pretty nice. Just one question nf your cheat sheet. Is RR set to 5 min enough to wash off the salts? I mean the rapid rinse time.

    By the way, I am experience water flow drop...
  24. Replies
    11
    Views
    1,357

    highly recommended 90 degree kit if you plan on...

    highly recommended 90 degree kit if you plan on running the pipes on wall and bring your softener closer to wall. I wish I had order the kit on my installation and now I'mm running my 7000 sideway....
  25. Jason did. His setting is little different as...

    Jason did. His setting is little different as yours so I like to adjust it

    PS. Ah I see... you must set the time to 12:01pm first... no wonder..

    18678
Results 1 to 25 of 42
Page 1 of 2 1 2