Search:

Can someone post a pic of 4" "y".

Thank you..

I leave in west phoenix.

I forgot to mention that for the new addition city inspector had inspected the plumbing combo and he passed it.

Here is a side pic of the drain combo and my helper take a break.


Once again...

I had to replace the drain portion on my hallway bahrooms.
Can you please advise if its fine the way I have it now ?

My concern is if water will leak from the drain where the the cast iron pipe...

When or where is type "M" or "L" of copper used at ?

Thank You...

I would like to tap off the water line from the water heater so that I can add an outside garden value for a water hose.

The copper pipe from water heater is 3/4 inch.

What size should I use to...

The pitch is about 30 degrees, the length of the pipe to main from cleanout is 3 feet.

My last resolution before I start breaking concerate is to lower the p-trap another 6" or lower if code...

The standpipe is 28 inches. The bottom of the p-trap is 12 inches.

The washer is a new front loader. The overflow is about a 2-3 cups full.

The pipe is 2" that goes to the 4" kitchen main.

I...

I was wondering if making the standpipe larger the 2" will help eliminate overflow.

Maybe 3" of 4 " to hold more water.

In what I have read in the paste 2 days it appears that the problem with...

Thanks...

its 2" inch pipe

Thanks for the feedback..

I did the changes that were recommended to me in regards to the drainage to our washing machine.

It still overflows when the washing machine is draining. At first I...

Thanks for all feedback. I did some changes to the drain, however it still overflows slowly when the washer machine is draining its water. At first it sounds that water is flowing fine, then I can...

I connected the drain as per pic, it was working just fine, until about 3 weeks ago. How its clogged up. It appears that its just clogs up when the washer machine is running and draining its water.
...