Search:

Thank u ..Corrected now

James check out this website www.radiantec.com call one of their techs/engineers they are great for answers......Hope this helped ....Good luck..:)

Thank u all...

See post #4..Any other ideas ??? Just stuck where i am and do with what i can i guess..

I wish i could put insulation under the planks BUT the guy built it with 2"x8"s for floor joists that rest on the solid (bedrock) ground...I would have to tear the whole floor up and i am not up to...

I have a 170 sq.ft.log cabin i want to put infloor radiant heat in..It has a true 1"x12" wood plank floor with one layer of Reflextic (Reflectic=aluminum foil on both sides and 2 layers of air...

Electric wires are only good to warm the floor..Not much good to heat the room in cold areas..........

You are always to the point..I for one appreciate your inpu on here...Thank u..:)

Read all the great advice in the above PLUS > Get a heat tape with a thermostat on it and wrap it around your pipes and put some pipe insulation on them..It will turn on at 38 degrees..Remember to...

Nate check at Home Depot or ******* ect for the toll free numbers of like Owens Corning and other insulating manufacturers and talk to the experts...

I would take out the pull stopper and replace it with a rubber stopper..Also there are nets and/or drain baskets u can buy that will catch the hair..IF u continue to let the hair and other items go...

I am in the Hills of S.D.to be on the safe side i installed a heat tape around the lower half of my tank even though it is drained.. The tape has a built in thermostat which turns on the tape at 38...