(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: earlrabbit; Keyword(s):

Search: Search took 0.12 seconds.

  1. Replies
    6
    Views
    483

    Not sure on pH, but hardness is 13.85 grains/gal...

    Not sure on pH, but hardness is 13.85 grains/gal and iron is .03 mill/ltr. It's city water but they source part of their needs from wells.
  2. Replies
    6
    Views
    483

    I was able to crush them between my fingers so it...

    I was able to crush them between my fingers so it sounds like the resin is toast - right?
  3. Replies
    6
    Views
    483

    Water softener resin is green

    I've been having problems with my 14 year old Northstar softener. I suspected that the resin might be bad as I've never run anything like "Iron Out" through it. After opening it up I see that most...
  4. I do get a brine draw (as I disconnect the tube...

    I do get a brine draw (as I disconnect the tube from the venturi I feel suction). The figure 8 seal was replaced along with all the other seals and I made sure it was positioned correctly. Not sure...
  5. Northstar - no soft water, replaced seals and rotor, about ready to give up

    My 13 year old Northstar water softener just isn't generating any soft water. I've cleaned the venturi and replaced the gasket in it. I've also replaced the seals and rotor in the valve. The...
Results 1 to 5 of 5