Search:

Hi all,
I'm looking to install a washing machine outlet box. I have 2 questions:
1. What do you guys recommend (I like the Sioux Chief Ox Box)?
2. What is the installed height off the floor?
...

Definitely planning on putting something under the plastic shower floor / pan (Mustee 32x48).
What would work best? A buddy gave me half a bag of thin set. He said he did his with that. An expert...

I have my basement bathroom fully studded, wired, and plumbed. I have the fart fan installed and vented. I am ready to install the plastic shower floor, durock, and then ceramic tile the shower. ...

I finally finished up my Moen shower valve / bathroom plumbing install.
I cleaned, fluxed, and soldered all threaded fittings. I'm happy to report no leaks! Now I can move on to installing the...

I did solder to the fitting prior to assembling to the valve. There may have been some heat transfer while connecting elbows, etc. I don't have too much room to work (about 3 inches per side). I...

I've installed a few Delta faucets and shower valves. They rarely leak and are very easy to fix. My current home has Delta faucets and Moen shower valves (my old house had all Delta faucets and...

Hi all,
I've plumbed in my basement bathroom and have no leaks in any of my solder joints. There are no leaks at the compression ball valves for stool and lav supply. The threaded fittings on the...

If the tee for the lav is from the 2", that would be wet vented over the toilet.

The 2 inch must be the vent for the stool, as it is right behind the stool's rough-in. The tee for the lav is off...

There are 2 pipes (1.5 and 2 inch) to the left (not shown) coming up out of the slab. They run parallel to each other up about 4 feet, then the 1.5 inch turns and connects to the 2 inch. The 2 inch...

Help. I'm adding a 3/4 bathroom in my basement ( I have a 1994 2 story house with full unfinished basement). The toilet rough in is there, the drain for the sink is there, and the supply lines are...