Search:

I found the white screws locally...AFTER I had ordered a new seat online!
For anyone who wants to save a BUNCH of money, the white screws are 14-1063, $2.50 per set.

I'd still appreciate your...

Someone posted on another forum that their soft close is now slamming shut. They were told to replace the entire seat but someone else said there is a hinge kit that would fix the problem. I wonder...

Thank you. That information would be helpful if there was a legible number in either tank. One has part of an S and the other has the tops of a couple of letters.

I'll give them a call tomorrow. ...

How do I know whether it's Cotton or Colonial White? Is there a number somewhere on the toilet to indicate color?

Thank you for the responses and suggestions. You guys are the best!

The other toilet had the running issue last year and I put in a Korky Quiet Fill. I plan to do that with this one, too.

The...

My TOTO Carlyle CST874 (MS874114SG) wouldn't stop running so I lifted the lid and then bent down to shut off the water at the wall. I knocked off the lid and it shattered. What's the best place to...

Thanks Jim. It has the screw showing, so not a Korky. Is there a schematic showing the part names so I know what I'm referring to? Fill cap, fill valve, etc.

I found CST874 inside the tank. I think that makes it a Carlyle?

Toilet is 3 years old. I don't see a model number or name. It may be a Carlyle.

Last night the fill continued to run. I turned off the water at the wall, and would like to make the repair myself....

Thanks, all. One last thing. When I looked in the tank for model information, I noticed the water isn't really clear. Can/should I do anything about cleaning out the tank?

Under the tank lid it says G-MAX Cyclone Flushing. The water comes in vertically in several places.

The toilets were installed while the house was undergoing renovation and I believe tile grout...

Is there a way to temporarily force the water level higher in the bowl? There's a hard water ring above the water level (Sani-Gloss not doing its job?) that I want to soak with vinegar, but the water...