Search:

The pipes coming through the well seal are definitely galvanized - I can't imagine they would have changed over to poly below the seal. You're saying jet certainly shot if galvanized because of...

Thanks - - The only way I could check the jet assembly I assume would be to completely pull the pipe? Well is inside in enclosed "pump" room with an eight foot ceiling of course, and probably...

Please help! Without water for ten days now.... Previous thread below, but similar to GoofyMonkey's also. Had to replace previous 1hp waterAce deep well jet pump with new one (exact same pump)....

Can anyone give me a check list of quick suggestions to try?

Thanks for the help......

Previous pump was the same unit and lasted seven years without problems - - not that there is much to shout about from that, but it must be able to handle the load.... I guess I will de-install and...

Is it possible that the air in the well piping can’t escape when trying to pour water in, and is preventing the water from filling the lines? Do you need to add water under pressure, or open an...

Correct - - - black item “H” is the regulator - - pressure gauge itself just screws into the side of the regulator.

Thanks!

The pressure regulator screws into the 1” hole – you are supposed to fill the pump and well piping through that hole first, then screw in the regulator. I would love to have dealt with anyone other...

Thanksgiving morning - had no choice but to replace with another WaterAce as everyone else off for entire four day weekend. Old Water Ace lasted seven years, not real good. 1" opening is right on top...

Regulator hole is 1" opening (not 1/4" gauge opening).... well is 200 ft. supposedly.... two pipes coming out of pump into well ..... is there another way to force water into it? thx

Help! Newbie so be kind? My well pump fried itself last week. Replacing with exact same pump - Water Ace 1 hp RC10 from Lowes - - located 8" from well head, galvanized displacement tank affixed...