From bad to worse, more remodel woes
Ok, so we thought we were home free with the plumbing til we went to hook up the bath drain this am. This is what we found. This pipe at the end of the purple line is busted, with the treads busted off in the piece above it. The problem we face is the lack of room to spin and turn to get stuff off, so whats the easiet way to do this? Thanks for any help!!
sharp steel cutting sawzall blade
Thats a fun one
and Cass is !00% right
it looks like you could cut that pipe off above the floor
behind inside the acess panel
cut out that nasty old tee too.....
get yourself some fernco fittings and just rebuild
the whole thing with pvc and a trap
be sure to wear a hat cause you are gonna get
some FUNK spattering all over the place when you
cut out that Drum Trap
Also take out that GLASS panel or it will be covered in FUNK
lay some shets up there or yo u will probably
be spending more time cleaning up the mess
than the whole plumbing job took....