Help! Don't know how to fix!
I did a demo on my kitchen and I crack the T piple (See pic bottom) and as well as I made a cut on the top pipe since the new cabinet block it. Now I am not sure how should I fix it, the top drain should goes to left kitchen sink and the bottom drain is goes to the Garbage Disposial.
I know you suppose to cut off the bad piece but there is no room to do the recoupling if I cut it and I don't want to open up a wall.
I look into RAM BIT but it is a bit expensive. Please advice what's the best way to fix this as all the coupling are GLUED.
Attachment 18434Attachment 18435Attachment 18436
Thank you all for the inpute.
Thank you all for the inputs! It was a double sink and I don't know why it has two outlet.
Originally Posted by Terry
I will try cutting off the fitting about 1" away at hub, saw a cut in the hub and slowly work my way to get the outside off using saw or hack saw. I want to get a RAM BIT but it is quite expensive for one time use.. So sad that they don't rent those.
I will post an update later.