Installing 12" toilet in 14" rough-in
I am replacing an existing toilet with a new dual-flush toilet. The rough-in is 14". the toilet I want to install is a 12" rough-in (I'm certain I can't get it in a 14" rough-in). Is the only problem I'll run into cosmetic, in that the tank will sit an add'l 2" from the wall from the existing toilet? it's hard for me to picture what that might look like, but it doesn't seem that big of a deal.
I have no plans to do any other remodeling, i.e. break the concrete floor, etc. I simply intend on replacing the toilet...I want this to be an easy job. Worst case I'll go shopping for a 14" rough-in toilet, but I'd rather not.
Any info would be appreciated.
14" rough-in flange setting and 12" toilet
I have an older cast iron flange set at 14" from the wall and a 12" toilet - leaving me 4" from the wall. Is there any type of flange or fixture I can get to move the toilet closer to the wall. I have seen offset closet flanges but there is already a flange (cast iron) in the floor. Am I doomed to buying a new 14" rough in toilet? Thanks