I was able to get into the master program mode
What do I do in this mode. Peter, do you happen to have the steps needed to reprogram the unit? Once I enter into program mode the display shows 9900. I can press the buttons beneath any of the numbers and it changes them pressing the enter button turns the PM indicator on or off. I have no idea how to exit this mode either, I have to just unplug the unit and plug it back in to get it back to the messed up clock that I described earlier with the split colon.
Technetic 1000 Programming Tips
Can Anyone tell me what the steps are to reprogram the technetic 1000? I tried posting the same question on the pentair forums but I wasn't getting any responses.
Technetic 1000 Programming
The 9900 shows up when I press the time and enter buttons together for 5 seconds. It stays on the screen until I unplug and replug the unit back in to get out of this programming mode, as I have yet to figure out how to exit this mode. Once I plug the unit back it, it goes back to the messed up clock display. The gallons remaining doesn't decrement either.
Technetic 1000 revisitied
We have a running T-1000 unit from 1995 and seems to be working OK, in my mind. The local co came by and suggested that the ion exchange was less efficient now and that we should get the new Avantapure system, another $2k.
50% less salt via a 'counter current regeneration process???
Supposedly too that the proportional brining is more efficient today.
The T-1000 also had proportional brining.
I am not convinced we have a problem. Do you think there is technology advancement with controls that might apply or be worth considering?
Do these ion exchange units need to be changed after 15 years or is it better to simply upgrade the system with something new?
Thanks for your help Nick P- MA