Drywallin'

Users who are viewing this thread

Ian Gills

Senior Robin Hood Guy
Messages
2,743
Reaction score
3
Points
0
Location
USA
I am taking a week off work next week to begin putting up the drywall in my basement. I have ordered lots of gizmos to help me with this. Any comments on any of them would be appreciated.

Telpro TROLL Troll 300-Pound Capacity Panel Handler
Shark 10-2206 Rockeater Drywall Saw
Stanley 93-301 14-Inch Yellow Panel Carry Handle
Senco 1R0004N DS200-AC Duraspin 3,300 RPM Collated Screwdriver
Improtec Lift'n'Lock - Drywall, Plywood, Door Lifter and Support
Pentagon Tool "Foot Lifter"--Two for the price of One!"
Free Hands Drywall Support
Duraspin #6 X 1-1/4" Drywall To Steel Screws

Have I forgotten anything else that might be useful?
 

Ian Gills

Senior Robin Hood Guy
Messages
2,743
Reaction score
3
Points
0
Location
USA
Thanks Cookie. I always carry at least 6 beers in the fridge.

Coming from Europe, I cannot get enough of this stuff:

6pkbMillerGenuineDraft12oz.jpg


It's quite a prestiguous beer there. My neighbors here though laugh at me for drinking it. They say it makes me look like a redneck!

I still think it's the best beer this country has to offer though. Refreshing and yet tasty. Yum.
 

hj

Master Plumber
Messages
33,602
Reaction score
1,038
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
beer

Your picture reminds me of when the brewers had their convention. The heads of four breweries got together for a night out. When the waiter came for their orders, the Mexican said, "Give me a Corona, the best beer in Mexico". The next one said, "Give me a Coors brewed with pure Rocky Mountain spring water". The third said, "Give me a Busch, straight from the midwest". The fourth, the Guiness brewer, said, "Give me a Seven Up". The others asked why he wasn't ordering a brew. He told them, "As long as you boys aren't drinking beer, it would be impolite of me have a beer in front of you and order a Guiness".
 

Jimbo

Plumber
Messages
8,918
Reaction score
18
Points
0
Location
San Diego, CA
I am taking a week off work next week to begin putting up the drywall in my basement. I have ordered lots of gizmos to help me with this. Any comments on any of them would be appreciated.

Telpro TROLL Troll 300-Pound Capacity Panel Handler
Shark 10-2206 Rockeater Drywall Saw
Stanley 93-301 14-Inch Yellow Panel Carry Handle
Senco 1R0004N DS200-AC Duraspin 3,300 RPM Collated Screwdriver
Improtec Lift'n'Lock - Drywall, Plywood, Door Lifter and Support
Pentagon Tool "Foot Lifter"--Two for the price of One!"
Free Hands Drywall Support
Duraspin #6 X 1-1/4" Drywall To Steel Screws

Have I forgotten anything else that might be useful?


Holy ring shank nail , Batman! You mean there is a better way than propping it up with your head and trying not to hit your thumb??
 

Dunbar Plumbing

Master Plumber
Messages
2,920
Reaction score
10
Points
0
Location
Northern Kentucky/Greater Cincinnati Area
Website
www.KoldBreeze.com
I think if luck had it and I was told that I could live longer if I just did drywall work, I'd settle for a shorter life.


It's a talent to all its own and no matter what I do, I get angry. And then there are people that make it look beautiful with feathering the joints and corners, bedding the tape so it is never seen again or has to be cut out and done over.



(goes and smashes drywall in fit of rage, calls someone else to fix it)
 

Ian Gills

Senior Robin Hood Guy
Messages
2,743
Reaction score
3
Points
0
Location
USA
This is just for the walls.

For a ceiling, I will be using a suspended solution. But I'll think about that after the walls are done.
 

Iminaquagmire

DIY Senior Member
Messages
206
Reaction score
0
Points
0
Ceiling first. It gets supported at the edges and it also makes it easier to place the drywall since you can maneuver it through the stud bays.
 

hj

Master Plumber
Messages
33,602
Reaction score
1,038
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
Drywall

YOu do realize, I suppose, that by the time you get, or rent, all that equipment, you could have hired someone to install it AND tape/texture it.
 

Ian Gills

Senior Robin Hood Guy
Messages
2,743
Reaction score
3
Points
0
Location
USA
Thanks everyone for the tips and FloridaOrange for the info on the gun.

HJ, it's not about the money. It's the joy of the craft. I don't ask questions on this site to save a buck or two. I'd rather pay more to do the job myself and take satisfaction in it than pay a poor licensed contractor to take that happiness away from me.
 

hj

Master Plumber
Messages
33,602
Reaction score
1,038
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
Diy

In that case, you are not a DIYer, you are a masochist. There is no way I would do something myself, IF it were cheaper to have a contractor do it. I might get some satisfaction from digging a few dozen holes tomorrow to plant trees and bushes, but I am perfectly willing to let the nursery have the enjoyment of doing it. Why not let him have the satisfaction of doing a good job?
 

Ian Gills

Senior Robin Hood Guy
Messages
2,743
Reaction score
3
Points
0
Location
USA
We all need a hobby Hj. What's yours?

Personally, I cannot think of anything worse than moderating an internet forum. But each to their own.

In the past I have actually paid plumbers to do work, and then told them to knock off early so I could finish the job.

It must be the European "socialist" idealism in me...helping a stranger...enjoying the fruits of ones own labor...state-provided health care...

I bought four access panels today. This seems a nice place to get them. http://www.accessdoorsdirect.com/

That is the one thing I love most about America. There is no other country on this earth when you can say "Right I want an access panel for my drywall", go online and order it. You can buy anything here so easily.

IMG-lay-pipe.gif


iStock_000005591833XSmall.jpg
 
Last edited:

hj

Master Plumber
Messages
33,602
Reaction score
1,038
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
access doors

It is even nicer when I do not have to pay shipping and can go a couple of miles away and pick out whichever ones I want and take them home with me. The guy in the picture may be there to lay pipe, but I wonder what kind uses a Crescent wrench and a 1/2" rachet drive?
 

FloridaOrange

Plumbing Designer
Messages
1,298
Reaction score
2
Points
36
Location
SW Florida
Ian,
Another note, if you have a helper you really don't need all the drywall support tools. My brother and I did quite a bit in his house and I think those things would've been in the way.
 

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,458
Points
113
Location
Bothell, Washington
Website
terrylove.com
The best way to learn drywall is to sit back and watch a pro do it.

When I was building houses, one of the contractors gave me some lessons in it.
It's all about bending the blades to put that fine taper where it meets the board.
I just looked at some mudding work in a friend's home, it was looking pretty hack.

The first coat goes on with the shorter blade,
and then the next day you go with a longer blade.
Most do two base coats, and then a topping coat with a long blade.
There should be almost no sanding needed if you are bending the blades enough.

For one day jobs, I hire a guy that uses 30 minute mud.
He can hang, tape and texture in one day.
But if you use the 30,45 and 90 minute mud, you better be good.
It doesn't really sand.

I've done a bit of taping over the years, but when I want it quick and really good, I hire out,
But Ian, you should have fun with it.
I wish I could find a good video for you on using the blades.
Most home shows don't let you see the real pro, just the stand up comedian that pretends he knows.

Don't buy the round tubs,
Get the boxes of mud.
One for the base coat
and one topping mix.
Throw away what you don't use.
Just buy the big box, you will be glad you did, it's better stuff.
For a first timer, don't use any quick mud.

Video of a dork pretending he can mud drywall.
This guy doesn't have a friggin clue.

Notice that his blade is too short, it should be a six or an eight for the first coat.
The ends of the blade should be pressed against the wall forcing a bend in the middle of the blade.
That way is will smooth itself.
Otherwise, you will be sanding the crap out of it like the dork in the video.

The last coat I use a 12" or longer blade.

For the first corner coats, you can use one made for that.
That way the blade will press tight against the wall on either side.

This guy is a little less dorky, but still not with the program.
The guys I work with would laugh.

Check out these video's Ian, much better
http://www.drywallschool.com/videos.htm

Or watch these video's first, and then go back to the top, and laugh your behind off.
The last video's are soooo much better.
 
Last edited:

Lakee911

I&C Engineer (mostly WWTP)
Messages
1,254
Reaction score
1
Points
0
Location
Columbus, OH
We all need a hobby Hj. What's yours?

I bought four access panels today. This seems a nice place to get them. http://www.accessdoorsdirect.com/

That is the one thing I love most about America. There is no other country on this earth when you can say "Right I want an access panel for my drywall", go online and order it. You can buy anything here so easily.

Actually, I'd rather build an access panel myself than buy one! If I can build one better and cheaper than I can buy it...why not?

Jason
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks