Price Phister AVANTE, removing mixing valve cartridge
I have what I was told by the guy at the hardware store is a Price Phister (AVANTE) valve. I tried to remove the old cartridge with no luck. :confused:
Is there a retainer clip or screw from the back holding the cartridge in place?
Is it just mineral build up? Any ideas for mineral removal woud be great.
Avante Valve - Upgrading the trim?
Decided to tag on to this post since there are some experts on this particular model from Price Pfister...
I have ordered the following trim to replace my outdated brass avante trim from home depot online:
Price Pfister - R897CBK
I am not certain what kind of valve I have, but I assume I have an 0x9 series valve which should work with this new trim.
My existing valve looks like this: Attachment 12363
Do i need to make any other special preparations to attach the new trim to the old valve? I replaced the cartridge about a year ago, so the valve works great. I want to avoid roughing in a new valve at all costs).