Replacing a lead soil tube
While remodeling a bathroom (built in '52), I had to destroy the existing brass flange and soil tube in order to remove the flooring (Ok, I didn't HAVE to, but I did it anyway because I don't know what the heck I'm doing). The soil tube was lead, attached to a slightly larger pipe (not lead, not cast iron, galvinized I s'pose) which is then seated (and apparently soldered) in the cast iron closet bend.
If I can remove everything down to the closet bend, how shall I connect my new 3" PVC to the closet bend? :confused: If I can't do this, then I'll call the plumber, but I really don't want to call the plumber. $$$
I have access from above and below, and I'm picking up a Bernz0Matic this evening to begin removing the remants of the old soil tube.
Related question to replacing soil tube
How do you connect PVC to a 4" cast iron pipe with a hub?
Thanks for the help - it worked
Your help regarding my lead soil tube was right on. I was originally planning on beginning with removing the solder around the ferrule, but I'm so glad I didn't after reading your advice. The ferrule turned out to be 3", just like my PVC and the Fernco coupler I had already bought. It all fits together like a champ.
Tomorrow, I'll be installing DurRock, then tile, then I'll fasten the flange and be all set to go.
Thanks again for your help.