Watson524
Member
We have a framed glass pivoting shower door. Taking the unit out to get moldy silicone cleaned up and redone. Have the door itself out and the right wall jam but there's a "side light" piece of glass that's about 10" wide that needs to come out before we can get to the left wall jam to remove the 3 screws. Each edge of the glass has 2 strips of vinyl glazing. The top 2 pieces (inside and out) just dropped down when we took the "header" piece off. We're left with bottom piece, left wall jam, glass panel and right side trim piece of glass. Is it safe to assume that the glazing pieces just come out and then get pushed back into place with re-assembly?
Thanks in advance!
Thanks in advance!