palmerjv
New Member
I have very hard water and trying to rework our water softener to get the best results. I currently have a twin tank system - Fleck 9000 controls 3 CUFT tanks. I would like to know what type of resins or others products might work on conditioning our water. I also have an extra single tank to place in line for an additional product if needed. I also have a cartridge prefilter - 5micron -eight tubes 30" long.
I have posted our water test results below:
Hardness as CaCO3 = 394 or 22 grains per gallon
Chloride = 176
Flouride 4.47
Nitrogen = 2.32
Sulfate = 142
Alkalinity total as CaCO3 = 211
Conductance = 1240
PH = 7.94
Total Dissolved Solids 736
I received this information from our city so it should be accurate.
Any advice would be helpful.
Palmerjv
I have posted our water test results below:
Hardness as CaCO3 = 394 or 22 grains per gallon
Chloride = 176
Flouride 4.47
Nitrogen = 2.32
Sulfate = 142
Alkalinity total as CaCO3 = 211
Conductance = 1240
PH = 7.94
Total Dissolved Solids 736
I received this information from our city so it should be accurate.
Any advice would be helpful.
Palmerjv