Sodium and Sulfate removal

Users who are viewing this thread

themitch

New Member
Messages
8
Reaction score
0
Points
1
Location
Binghamton NY
Hello,

I received a well water test back and was surprised at a few findings.

The findings are:

Calcium 8.42 mg/L
Calcium Hardness 21 mg CaCO3/L
Magnesium 1.79 mg/L
Sodium 150 mg/L

Alkalinity 270 mg CaCO3/L
pH 8.46
TDS 375 mg/L

Iron was not detected.

2 values that I did not get tested but will now get tested are chlorides and sulfate.
I will update when I receive them.


What I would like to do is to lower the little hardness there is, lower the sodium, and once tested lower the sulfates.

What I would like have is a mixed bed system that regenerates with Potassium Chloride.

There is someone in the house on a sodium restricted diet and we would like to move away from the expense of bottled water.

Thank You,
Brian
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks