DWV Rough In Review

Users who are viewing this thread

rafigso

New Member
Messages
8
Reaction score
0
Points
0
Location
Greensboro, NC
Good Morning,

Finally got the drains and vents in. Please tell me if they look ok. For the record, I didn't hack up the joists, that's what I found when I opened the floor. I'm trying to strengthen them as much as possible. Where some of the cuts are, the joists are resting on load bearing walls, so it's not as bad as it looks.

I'm concerned about the shower, the vent is prior to the waste taking a turn to go downstairs, is that ok? Seems that's the only thing that can work here. I left the pipe coming up through the floor a bit long so I could cut it to the proper length once I have my foor in and drain in hand.

this is the shower back to vent and then the drain at the Wye
photo 1.jpg

This is the Wye
photo 2.jpg

This is the drain for the vanity
photo 3.jpg

This is the vent for the vanity
photo 4.jpg

Thanks in advance for any input.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks