Hi,
I recently redid my bathroom floor due to what I guess was a leaking wax ring. Pulled up nasty particleboard under luan/sheet vinyl that was hiding it all.
I replaced all of it with a nice tile floor, and (as you've probably guessed) my closet flange is about 1/8" under the new floor level.
I have what looks like a 4" brass closet flange on a 4" copper waste line. The new plywood subfloor/hardibacker is wedged under it pretty nicely so it shouldn't move.
I bought Quik-Fix's Close Flange Extender kit from my local Lowes (http://www.quickfix****************.com/prod02.htm).
Do you know if I can use this on a brass flange or would you recommend another product?
I tried the email address on their site (delivery failed), and their phone number (nobody picked up), so I'm at a loss for advice.
Thanks,
Al
I recently redid my bathroom floor due to what I guess was a leaking wax ring. Pulled up nasty particleboard under luan/sheet vinyl that was hiding it all.
I replaced all of it with a nice tile floor, and (as you've probably guessed) my closet flange is about 1/8" under the new floor level.
I have what looks like a 4" brass closet flange on a 4" copper waste line. The new plywood subfloor/hardibacker is wedged under it pretty nicely so it shouldn't move.
I bought Quik-Fix's Close Flange Extender kit from my local Lowes (http://www.quickfix****************.com/prod02.htm).
Do you know if I can use this on a brass flange or would you recommend another product?
I tried the email address on their site (delivery failed), and their phone number (nobody picked up), so I'm at a loss for advice.
Thanks,
Al
Last edited: