fred
New Member
- Messages
- 1
- Reaction score
- 0
- Points
- 0
I recently saw water gushing out of a hole in the lawn. I cut out a small section of grass for about 4 inches deep and noticed the sprinkler PVC is cracked. I saw your response to a similar posting by a viewer. The response was short and informative about using a coupler but I am not sure how you would get a coupler in line with the PVC tubing when PVC tubing itself is stiff and does not bend. I may have to cut out 6 inches of the cracked PVC.
I appreciate your full advice. Thanks.
Fred
I appreciate your full advice. Thanks.
Fred