Washer and Laundry Sink Drain

Users who are viewing this thread

M4Gallagher

New Member
Messages
1
Reaction score
0
Points
1
Location
Michigan
I am adding new laundry room (remodel). I have gone through and read as many posts on the forum as possible with similar question. Can someone verify this would be the correct design for Washer drain and laundry sink draining into common 2" inch drain with 1.5" vent? I am in Michigan and will be doing work myself. Couple of other questions, can a double Wye be used connecting both sink and washer to vertical drain? Or if not, would I use single Wye for each? Is the washer vent tie in (green) needed? The 2 inch vertical drains below floor into 3.5" horizontal drain.

Thank You.

Bret


1706981310995.png
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks