[tip] mandrill removal

[trickle]

I had such a tough time removing the mandrill from my hole saws. Even after one use they are stuck tight!

I found this video usesful so I posted it.

http://www.youtube.com/watch?v=skk1W6AI-rE

In case the link disapears; the video shows a man using an impact wrench with a socket driver to remove the mandrill.


p.s. sorry if there us a way to embed the video, I tried a few add it did not work.

 

[Cwhyu2]

Okay that was cool had this happen to many times.

 

[Sponsor]

 

[hj]

chuck the hole saw in your drill. Insert a screwdriver into the holes in the hole saw, (or grab the hole saw with a pipe wrench), and hit it with a hammer. Works every time.