Lavatory faucet stem identification

[brandon watson]

Is any body able to identify this stem

 

[hj]

The "Design" is too generic so we would need to take it somewhere with actual size drawings to match it.

 

[Sponsor]

 

[Smooky]

It would be good if you could measure the length or lay it down next to a ruler and take another picture.
If you could count how many splines are on the broach would help to identify it or take a close up of the other end.
Without knowing that info it looks like a Reid Watson ceramic stem. There are several other stems that look very similar.
http://www.nyrpcorp.com/for-reid-watson-nyw-459451-ceramic-stem-unit-hot

http://www.allpaylessplumbing.com/product/L2.19-S16-RWC02JF-H

 

[brandon watson]

Thank you for your help that appears to be the correct stem I appreciate your help

 

[brandon watson]

It would be good if you could measure the length or lay it down next to a ruler and take another picture.
If you could count how many splines are on the broach would help to identify it or take a close up of the other end.
Without knowing that info it looks like a Reid Watson ceramic stem. There are several other stems that look very similar.
http://www.nyrpcorp.com/for-reid-watson-nyw-459451-ceramic-stem-unit-hot

http://www.allpaylessplumbing.com/product/L2.19-S16-RWC02JF-H

Hey thanks for the info that was the correct stem I really appreciate your help

 

[Smooky]

You’re Welcome, glad I could help.