Brizo Tub Spout Install Copper

[JSAJSAJSA]

Hi there,

I am trying to help out a family member who purchased a bathtub trim kit (Brizo Rook) to replace the original trim kit. I am running into struggles with figuring out if there is a way for the tub spout to be installed properly on a copper stub out. To me, there doesn't seem to be a way without replacing the elbow joint behind the finished wall and putting on a threaded pipe at the right length. It seems that the threaded female connection on the spout needs to connect right at where the finished wall is so I couldn't solder on a copper fitting without more clearance. Any insight would be greatly appreciated

Thanks,
Scott

 

[Terry]

Brizo and Moen do make slip spouts that can use the copper stubout.
The spout you have is threaded, which does require a pipe nipple, or at least cutting back the copper inside the wall for a male adapter.
I would get a different tub spout.

 

[Sponsor]

 

[John Gayewski]

Without access from behind you'll probably need a different spout.

 

[JSAJSAJSA]

Thanks for the help. Will likely move on to a new trim and faucet set.

 

[Tuttles Revenge]

I have that exact tub spout in my hand.. its Way Way too heavy and long for installing on a copper stub. Just buy a different tub spout and keep the rest of the set.



VESI
Pull Up Diverter Spout