DrippingWet1
New Member
Like the title states I have a cable that on the outside looked identical to a Delta 600 however once I pulled it apart I found this. Cannot find a match anywhere, possibly a Valley?
Another Delta 600 Misidentified Help Needed
- Thread starter DrippingWet1
- Start date
Users who are viewing this thread
Marlinman
In the Trades
Your faucet was marketed through various companies. Mostly Indiana Brass and Milwaukee. Cartridge # 46-8700
Sponsor
Paid Advertisement
DrippingWet1
New Member
Woah did it break apart inside or was the old design two pieces. I appreciate the fast response thank you!
Marlinman
In the Trades
It broke at an assembly point.
DrippingWet1
New Member
You’re a legend, thank you for the help!
DrippingWet1
New Member
Update: I bought the part and installed it today. However after I turned the water on at this valve it would leak with the handle turned off. I think it’s because the rear Oring seal is different and smaller on the new part. I was able to take the old cartridge and flip the rear seal around causing the flat side to be into the cartridge and the side that was in cartridge wasn’t as flat. I stripped the inner springs and seals and installed them on the old cartridge.
Once I rebuilt the old cartridge, everything worked properly and the water no longer dripped. Any where I can find the rear oring seals 3/8 OD.
Once I rebuilt the old cartridge, everything worked properly and the water no longer dripped. Any where I can find the rear oring seals 3/8 OD.
Last edited:
Similar threads
