galvanized replacement

I have entered a contract to purchase a house and I’m in the inspections stage. I want to be sure I’m not taking on a big project so I’m getting all kinds of inspections and reading a lot and have lots of questions. 1) I am assuming that it was plumbed with galvanized pipes for water and cast...

Hello, I have pvc pipe coming from my water meter to the entry point of my home where it then ties into galvanized pipe nipple. I want to replace the galvanized pipe. The inside water lines at the shower and bathroom sinks are already copper. I also want to replace the galvanized pipe nipples...

Hey guys and girls, I’m new to plumbing and I have a bathroom I am remodeling. I have a basic understanding/knowledge about plumbing, but far from an expert. How would you fix this dated plumbing mess? If you could attach links to parts that would be appreciated. Thanks in advance. Trying to...

In my situation there is not enough room between the galvanized fittings to cut and have a stub big enough to use a no-hub adapter. I am working with a 1-1/2" waste line. I am wondering if I can connect one side of a No-hub adapter over the female portion of a galvanized fittings (maybe use a 2"...

My condominium association in Houston just finished replacing the original 1-1/2" galvanized hot water line in one of our four buildings with CPVC but now we want cold side done too since we have 6 peoples' ceilings open. People are wondering why we did not use PEX from the start. The plumbing...