braided line

  1. Rocknroj

    Length limit on icemaker braided line and is it critter proof?

    thinking of replacing my icemaker line by coming from under the sink, across the room, then up to the fridge.. gonna be close to 25' from the valve to the back of the fridge when all said and done. its pvc with stainless braid exterior and 1/4" compression fittings.. running it down to crawl...
  2. Viz

    Identify leaking braided supply line

    Hi all, I have a braided supply line that is leak and I can't figure out who makes it. All I can see on the ferrule is that it appears to be stamped with A B . The nut on the line looks like the one in the picture with that pattern in it. Thanks for any help!
  3. Viz

    Identify Polymer Braid Supply Line

    I'm looking to identify the manufacturer of a braided supply line. The ferrule is stamped with "FOR USE WITH WATER IN ACCESSIBLE LOCATIONS ONLY, the UPC symbol, LOW LEAD C2543 11 17 BMC" Thanks is advance for any help!
  4. NebraskANN

    A little advice on installing a water line to my icemaker

    I've read in other threads that you're not a fan of saddle valves because they aren't designed for long-term use. Is there a fitting I can add to the existing braided water line so i can run a braided line to the fridge? Can I just take the one of the two fittings or joints (not sure on the...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks