Search results

We bought a widespread faucet for our new bathroom vanity - unfortunately, the max deck thickness is a 1-5/8", and the countertop is 2" thick. I called the retailer but there's no deck extension kit for this faucet. Is there a deck extension kit from another manufacturer that would work here...

So I'm redoing my bathroom, and I roughed in the new toilet drain about 1" above the subfloor, figuring that the concrete backer board + thinset bed + tile would put the finished floor just level with the drain. Unfortunately, I didn't account for the fact that the floor was significantly out of...

I'm roughing in a pot filler, and I'd like the ability to put a water filter on it. My first thought was to rough in two 1/2" stubs in the cabinet above the range - one will be the "input" side that connects to main water supply line, and the other the "output" side that connects to the pot...

I am replacing a storm line running to a roof drain, and it currently has no trap and connects directly to my main sewer line (combined sewer and storm lines are very common in my area). As long as I'm replacing it, I figure that I should do it properly and add a trap to it. How soon can the...

Is the following wet venting permissible under UPC? I'm pretty sure the answer is no, but thought I'd check with the experts just in case, since it would make my life easier.

My plumber ran some supply lines in a very narrow brick channel next to the cast iron waste stack. Unfortunately, the copper and cast iron are touching at points, and the channel is so narrow that it's not possible to get any foam insulation in there. What else can I use to protect the copper...

I'm reconfiguring an upper floor bathroom and trying to figure out the plumbing. In particular, I want to move the toilet to the far left hand side of the bathroom; put a double vanity in the middle; and a shower stall on the right. The main stack is in the middle of the bathroom, so the toilet...